Pebbles - polished by the sea, smooth rounded pebbles, today is a very popular material for garden decor. It looks attractive and aesthetically aesthetic as a material for a garden path or a patio, and as a decoration or the main material for the fence. Some owners of private houses bridge whole yards with pebbles, creating a strong, durable, beautiful coating. Selecting stones in color, in shape, size, skillfully combining them, you can create amazing patterns. What can be built from pebbles in your best leca? Consider several simple examples.
Example #1 - Decorative Pyramid
The pyramid is made very easily, such a design can be placed in a flowerpot, a flower pot, to make a few pieces for a flowerbed.
You will need pebbles, the size of which gradually decreases, like rings in a children's pyramid, as well as glue. A smaller stone is glued to the largest flat stone, which will be the base of the pyramid, the glue should dry, after which you can proceed to the next stone, etc.
A wide flat stone is taken for the base, it is dug into the ground so that the pyramid is stable. The upper stones can be pointed, irregular in shape
The pyramid is dug in the base in the pot or soil on the flowerbed, it looks very original.
The pebbles made of pebbles are an original garden decor that will attract attention. Such a design among green plants looks very peculiar and organic
Example #2 - Flower Pothehe.
In order to “sheathe” with a pebble flower pot, it is convenient to use a cement mortar. Pick up pebbles approximately the same size and put them with an edge. Small stones can be attached with the base. A layer of cement can be painted, or painted in some one or more flowers of pebbles itself-here at your discretion. As a base, a stand for the pot, a large flat boulder is suitable if you find one. Plants in such pots look attractive and natural.
To create this pot, pebbles of various colors are used, quite large. In order to renew a small pot, pick up small pebbles (flat or pointed). Several these pots with green plants will help create a wonderful composition
Example #3 - "pebble" rugs
Putting a path of sea stones is quite complicated, but making a rug out of them is simple, and it looks great. You will need flat pebbles of about the same size, glue, carpet (preferably thin), a knife.
First you need to place stones on the carpet without glue to create an even surface, then you can start gluing each individual pebble
Choose the stones of the same thickness from your collection to step on the rug was convenient. Then you need to cut a piece of carpet of the desired size (you can use the old carpet, path). We have stones on the fabric, spreading them so that the coating is smooth, harmonious. For gluing, silicone glue is used. The glue is applied to each stone, and then the pebble is laid in the place allotted for it.
The necessary components for creating a rug: carpet, glue, knife and flat pebbles. Such a rug can be used in the garden, at the entrance to the house, and in the interior. You can similarly make stands for the garden service
When the glue dries, the rug is ready. It can be put at the entrance to the gazebo, at the bench. If you want to place it in the yard, you can use a rubber rug as a basis and glue on rubber. Such a pebble rug will not be afraid of water. By showing imagination, you can create a real masterpiece using paints, stones of different colors, spreading patterns.
To create this rug, pebbles of the same size, a wide variety of natural shades were used. You can try to lay out a simple geometric pattern using a larger pebble or smaller, you can paint it - work with sea pebbles is doubly pleasant, because You can create everything you like
Example #4 - a basket of sea stones
To create a decorative pebble basket, you will need the following tools: two small plastic pots of the same size, scissors, plywood sheet (10 mm thick), pencil, jigsaw, transparent film, hammer, several nails, frost -resistant and moisture resistant cement glue, small flat pebbles (about 200 pieces, length-3-4 cm), nippers, spatula, brush, wire mesh.
So, we start work. First, we cut off the rims (2.5 cm width) from the upper part of one of the pots. We squeeze the rim so that the oval turns out, put it to a piece of plywood, circle the contour. Then we cut the figure received on the faner with a jigsaw. The rim is put on a plywood oval, attached to it with nails along the edges of the plywood. This is a template for creating the base of the basket.
Source:hydrogardengeek.com
You will be interested:
https://meadd.com/unaflores/72980115
